Takeoff to quote
Deck Takeoff Software
Enter the deck once — length, width, height, joist spacing, waste and footing count — and get a complete material takeoff. Every quantity carries its formula, so the takeoff becomes the quote instead of a scratch pad you retype later.
What the takeoff covers
Square footage ÷ coverage per board, plus your waste factor, by board width and length.
Run ÷ on-center spacing + 1, plus rim joists, sized to your span.
π × r² × depth per hole, converted to cubic yards and 60 or 80 lb bag counts.
Screws per square foot, converted to boxes at your box count and price.
Linear feet ÷ section length, with post count from your post spacing.
Total rise ÷ target riser height for riser count, stringers and tread boards.
Why the math travels with the line
A takeoff that lives in a calculator tab dies there. When the client asks why the board count went up, or a dimension changes on site, you redo the arithmetic by hand. In Deckworks each line keeps its formula, so changing 16 ft to 18 ft updates boards, screws, railing and the total in one move.
Takeoff questions
What is a deck takeoff?
A takeoff is the material count pulled from the deck's dimensions: how many decking boards, joists, fasteners, railing sections and bags of concrete the job needs before any pricing happens.
Do I need separate calculators for lumber and concrete?
Not here. One set of dimensions drives all six calculators — decking, joists, fasteners, railing, stairs and footings — so nothing is entered twice.
Does the takeoff carry into the quote?
Yes. Each calculated quantity becomes a line item with a math note attached, so the estimate shows both the number and the formula behind it.
How accurate is it?
The geometry is exact and waste is applied at the percentage you choose. Accuracy of cost depends on the supplier prices you enter, which you control per line.
A one-page checklist so you never forget footing depth, waste factor, or permit costs on a deck quote.
No spam. Unsubscribe any time.